How to maintain the PS foam sheet extrusion line?

How to maintain the PS Foam Sheet Extrusion Line?

We all know that in order for our equipment to function properly for longer, we must maintain it.Routine maintenance is a periodic routine operation, which does not occupy the running time of the machine and equipment, and is usually completed during the start-up period. The key to the daily maintenance of the extruder is to clean the equipment, lubricate the moving parts, fasten the loose threaded parts, check and adjust the motor in time, control the surface, various working parts and pipelines, etc.
Regular repair and maintenance is usually carried out after the Polystyrene Foam Sheet Extrusion Line continues to run for 2500-5000 hours. The equipment needs to be disassembled for inspection, testing, and identification of damage to key parts, replace parts that have reached the specified damage limit, and repair damaged parts. In this way, it can not only reduce the failure rate of the equipment, but also prolong the service life of the equipment. Now let's take a look at how to maintain our Foam Food Box Sheet Extrusion Line.

Empty operation is not allowed to prevent the screw and machine from rolling.If there is an abnormal sound when the extruder is running, it should be stopped immediately for inspection or repair.Resolutely prevent metal materials or other sundries from falling into the hopper to prevent damage to the screw and barrel. In order to prevent iron sundries from entering the machine barrel, a magnetic component or a magnetic frame can be installed at the feeding port of the machine barrel when the material enters the machine barrel. To prevent sundries from falling into the barrel, the materials must be screened in advance.
Special attention should be paid to the cleanliness of the production environment, so as not to allow waste and impurities to mix into the material to block the filter plate, which will affect the output value and quality of the product and increase the resistance of the machine head.
When the Polystyrene Foam Sheet Extrusion Line will not be used for a long time, it should be coated with anti-corrosion grease on the working surface of the screw, machine frame, machine head and so on. The small screw should be suspended in the air or placed in a special wooden box, and be leveled with wooden blocks to prevent the screw from being deformed or damaged.Regularly calibrate the temperature control electronic meter to check the accuracy of its adjustment and the agility of its control.
Maintenance of Polystyrene Foam Sheet Extrusion Line
1. Check before and after use
1) Before and after we use the plastic foam extruder, we must also do a good job of inspection. We need to confirm whether the equipment can be used normally, whether there is abnormal buzzing sound, etc.
2) Especially in terms of indicator lights, everyone should make sure first. If there are some faults, the corresponding indicator lights will be on directly, then we cannot operate normally. We must check first to make sure the fault is resolved before proceeding. use.
3) Stop the operation of the equipment after use, turn off the relevant power supply and valves, and do not continue to use or power on, so as to avoid unnecessary problems.
2. Regular simple maintenance
In fact, the maintenance of the Foam Food Box Sheet Extrusion Line is not very difficult. Generally, the staff who use it also know how to deal with it. For most businesses, it must be implemented on the head. Only by rotating inspections can we know what kind of problems have occurred and whether there are some parts that need to be replaced. As long as Foam Food Box Sheet Extrusion Line can be easily maintained,Lunch Plate Foam Sheet Extrusion Line can also avoid various problems, prolong the service life of the equipment, and ensure our rights and interests.